Generally speaking, people generally know that machinery and equipment or dangerous goods need to be maintained, but they are often negligent and careless about the use of hand tools. As a result, the proportion of injuries caused by hand tools is more than that of machines. Therefore, the maintenance and management of hand tools before use, It is even more important.

(1) Maintenance of hand tools:

1. All tools should be checked and maintained regularly.

2. Various tools should have inspection and maintenance record cards, and detailed records of maintenance and maintenance data.

3. In case of failure or damage, check and repair immediately.

4. When the tool is damaged, the cause of the damage should be found out.

5. The correct use of tools should be taught before use.

6. Tools that have not been used for a long time still need to be maintained.

7. All hand tools must be used in accordance with the designed purpose.

8. Before the tool is installed securely, it is forbidden to use it.

9. Tool maintenance should be implemented in a static state.

10. Do not stab others with sharp tools.

11. Never use tools that are damaged or have loose defects.

12. The tool has reached the service life or limit of use, and it is forbidden to use it again.

13. When maintaining tools, follow the principle of not destroying the original design.

14. Tools that cannot be repaired in the factory should be returned to the original manufacturer for repair.

(2) Management of tools:

1. Tools should be kept by a dedicated person, and easy to check and repair.

2. When dangerous tools are borrowed and distributed, protective equipment shall be distributed at the same time.

3. Various tools should be stored in a fixed place.

4. All tools should have recorded data, including date of purchase, price, accessories, service life, etc.

5. Tool borrowing must be registered, and the borrowing data should be kept intact.

6. The number of tools should be counted regularly.

7. The storage of tools should be classified.

8. Tools that are more easily damaged should be backed up.

9. The specifications of the tools should be standardized as much as possible.

10. Valuable tools should be collected and stored properly to avoid loss.

11. Tool management should establish management and borrowing methods.

12. The tool storage place should avoid moisture and have a good environment.

13. The industrial and commercial scrap shall be handled in accordance with regulations, and an application for repurchase shall be applied.

14. The borrowing and returning of tools should be cautious, fast, reliable, and simple.

Hand tools are generally used in special environments, such as flammable, explosive, and extremely harsh conditions. It is a consumable item, and only by using the correct method of using the handshake tool can the occurrence of injury accidents be reduced.